Sound Hire:

AmplifiersSound Solutions | Amplifier Hire Surrey | London

-

Please see below some of the Amplifiers and amplified controllers we keep in our hire stock, the DQ-20 will will run any speaker from our EM Acoustics hire stock to its full potential.

EM Acoustics DQ20 (Linea Research 44M20)

Day £65 / Weekend £100 / Week £150

EM Acoustics DQ20 (Linea Research 44M20)

The DQ Series of advanced system amplifiers offer a unique combination of high power and audio performance, seamlessly combined with advanced DSP and network control. The DQ Series offers three models, physically identical four-in-four-out amplifiers but with varying total output power configurations of 6,000 watts (DQ6), 10,000 watts (DQ10) and 20,000 watts (DQ20) to suit specific loudspeaker models and audio applications. The DQ Series models offer extremely high power density in a convenient and flexible format for both mobile applications and installations alike.

DQ Series advanced system amplifiers represent the ideal solution for powering EM Acoustics loudspeakers. Each amplifier comes loaded with preset files for all EM Acoustics loudspeaker products, as well as a dedicated “linear” preset with no processor settings applied – but also blank memory slots for users to create their own setting files. Aside from the non-adjustable factory settings for each EM Acoustics product, users have access to a variety of processing functions including gain, delay and EQ (parametric and shelf) for system or venue optimisation. Power delivery is an area where the DQ Series amplifiers are unmatched. A state-of-the-art switchmode power supply with power factor correction ensures that a DQ Series amplifier can deliver all that is required, even under demanding load conditions and across a wide range of mains supply voltages. DQ6 and DQ10 amplifiers feature an automatic load sensing function which allows them to deliver maximum power into higher impedances. This makes them very cost effective and flexible in a variety of applications. The use of state-of-the-art components and a finely optimised design results in generous power reserves, thus ensuring that pristine sound quality is maintained even under the most extreme conditions, anywhere in the world.

DQ Series amplifiers have both analog inputs (4) and AES3 digital inputs (2) as standard, and can be supplied with an optional Dante™ networked audio input card if required (model numbers DQ6D, DQ10D and DQ20D). Maximum flexibility was the thought process with regards the input infrastructure – the four-in-four-out configuration allows the DQ Series models to be highly flexible whether deployed powering front of house systems, monitor mixes, or fill loudspeakers.

The front panel provides an intuitive set of controls and indicators to enable simple and straightforward operation of all functions without the need for the remote software. A set of five LED indicators show signal level from -12dB to clip for each of the four DSP inputs. Six illuminated push buttons and two velocity-sensitive rotary encoders provide the user interface for all input and output functions, as well as utility features, in conjunction with the clear back-lit graphical display. A further set of LED indicators show output level and limiter status, and individual backlit channel mute buttons are also provided. A final set of four LED indicators give further status information for the amplifier including AES3 or Dante network audio input, device control network status, and also the presence of a system EQ overlay if activated. DQ Series amplifiers are built around a 2U all-metal chassis to ensure a lifetime of reliable performance. Low-noise variable speed fans are fitted, along with a reticulated foam dust filter which can easily be removed for cleaning. The rear panel houses the Neutrik XLR analog input and link connectors, AES3 input and link connectors, RJ45 communications port, and output connectors on Neutrik speakON™ NL4. Mains power is connected via a 32A Neutrik powerCON™ locking type connector. If fitted, the Dante™ primary and secondary RJ45 ports are also located on the rear panel of the amplifier, along with a Phoenix connector for contact-closure input and relay output connections.

The DQ Series represents a huge leap forwards In amplifier technology, and offers users significant ease of use, improved reliability and better return on investment compared to traditional amplifier/processor combinations.

Day £65 / Weekend £100 / Week £150

BOOK HERE

YAM P7000S

Yamaha P7000s Amplifier

Day £22 / Weekend £30 / Week £45

YAM P7000S

Yamaha P7000s Amplifier

Yamaha’s audio engineers have specifically designed the new P-Series power amplifiers to be perfect companions to the popular Club Series loudspeakers. To achieve this, they made sure that the amplifiers are capable of delivering power that matches the power handling capabilities of the Club Series Speakers, and equipped them with YS Processing (Yamaha Speaker Processing) to deliver a signal that will result in optimum system performance. Power is plentiful, ranging from 3200 watts from the P7000S to 1300 watts from the P2500S in 4 ohms bridged mode.

If you want the perfect power amplifier for pair of Club S115s with a 500-watt program rating, for example, the P5000S with 500-watts per channel into 8 ohms is the obvious choice. Further matching precision is afforded by Yamaha’s proprietary YS Processing circuit. Each P-series amplifier is equipped with this specially designed circuit so that it delivers output tailored to the specific response of the Club Series speakers. All models feature both XLR and 1/4-inch TRS inputs, and Neutrik Speakon, phone plug, and 5-way binding post outputs. Other features include Yamaha’s exclusive EEEngine technology for high performance with exceptional efficiency, sweepable high and low pass filters for matching output to any loudspeakers, a compact and durable 2U chassis, and variable speed cooling fans.

Day £22 / Weekend £30 / Week £45

BOOK HERE

PKN XD

PKN- XD 4000

Day £35 / Weekend £55 / Week £75

PKN XD

PKN- XD 4000

The PKN-4000 is a High output power and high efficiency high quality and professional power amplifier weighing just 9kg this amplifier is ideal for touring applications. 2x 2100w @4ohms.

Day £35 / Weekend £55 / Week £75

BOOK HERE

MC2 E90

MC² E-90

The E90 is the newest addition to the E Series. Based on new MC2 proprietary Class-D technology, it has been designed to meet the demands for higher power with increased efficiency whilst still maintaining the renowned MC2 sonic qualities and unsurpassed reliability. Running cool even in the most difficult conditions, the E90 can deliver up to 4500w into 4 ohms and a massive 8000w into 2 ohms, with outstanding distortion figures.

The sophisticated MC2 power control circuits keep the amplifier operating within safe limits and allow it to be operated on standard mains supplies. Together with its switchmode power supply and huge power reservoirs, the E90 is capable of delivering large peaks of energy, producing effortless bass delivery without any perceivable ‘sag’.

Day £65 / Weekend £100 / Week £130

BOOK HERE

I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Need a bespoke solution for an upcoming event? For any sound, lighting or visual hire, call one of our experts today on 01737 590218

GET IN TOUCH